Home > Error Codes > Designjet 5000 Error Codes

Designjet 5000 Error Codes

Contents

If the tubes system is priming: install setup printhead(s) Ensure that HP No. 81 printheads are installed. If the error continues, call HP for technical support to troubleshoot the problem. Troubleshooting steps Turn the printer off, using the main power switch located on the back of the printer. Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. http://completeprogrammer.net/error-codes/designjet-130-error-codes.html

In your opinion is this something that we caused during the installation? If the error goes away, the issue is with the print server. If the error persists, please call HP for technical support to troubleshoot the problem. Turn the printer on and attempt to print.

Designjet 130 Error Codes

If the error continues, call HP for technical support to troubleshoot the problem. Turn the printer on. The name of the software in use, and its version number.

Click here for information on contacting HP Customer Care. If the error continues, call HP for technical support to troubleshoot the problem. Later herinneren Nu bekijken Conform de wetgeving ten aanzien van de bescherming van gegevens verzoeken we je even de tijd te nemen om de belangrijkste punten van ons Privacybeleid door te Hp Designjet 1050c Error Codes Power printer off and on again using the power switch at the back of the printer 19 Designjet 5000 / 5500 040000 errorĀ 01E603D9 This is an error that is related to

top System Error ffff ffff 03450097 Explanation The Top cover was opened during the cutting operation, the printer hangs and the Carriage suddenly stops. Designjet 500 Error Codes Click here for instructions on how to upgrade the printer's firmware . top System Error 050001 (continuable) Explanation The Lens is having problems reading the Mark Encoder on the Drive roller. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpp03890&sp4ts.oid=82225 Je moet dit vandaag nog doen.

Select the part replaced (Main PCA) and press ENTER. Hp Designjet 450c Error Codes Depress, and hold the DOWN ARROW and the TOP key simultaneously, while turning the printer on using the main power switch (may require two people). It always happens during initialisation, while checking the Printhead Cleaners. Return to TWI Documents Library Index Page HP Designjet 5000 and 5500 Series - TWI: System Error 0B0004, 0B0005 In this document: Parts required (part numbers are subject to change) Troubleshooting

Designjet 500 Error Codes

If the error persists, upgrade the printer firmware (if upgrade is available). check it out Depress, and hold down the DOWN ARROW and the TOP keys simultaneously, while turning the power to the printer back on. (Use the power switch at the back of the unit.) Designjet 130 Error Codes Click here for information on contacting HP Customer Care. Hp Designjet Error Codes If the error re-appears, call HP for technical support to troubleshoot the problem.

Before calling one of the Hewlett-Packard offices, please have the following information available to help them quickly answer questions: The printer product number and the serial number, found on the label http://completeprogrammer.net/error-codes/designjet-100-error-codes.html Attempt to manually recover the printheads: Scroll to the Printhead menu icon (icon on the lower right of the front panel display) and press Enter. Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. Chris Lee 3.489 weergaven 2:01 HP 5000 5500 Designjet printer keeps asking to replace printhead within a short time. - Duur: 0:55. Hp Designjet 5500 Error Codes

Re-boot the Printer and make sure that the Window is never opened during the cutting operation. Replace the ink cartridge. The 040000 class of system errors can also be network or Jetdirect related. More about the author Troubleshoot the Operating System (OS), the file being printed, the data connection or the software program being used.

All necessary files will be installed. Hp Designjet 750c Error Codes If the printer comes to ready, replace the Jetdirect card. All necessary files will be installed.

Inloggen 2 Laden...

Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. Recommended action Turn the printer off, using the main power switch located on the back of the printer. Click here for information on contacting HP Customer Care. Designjet T1100 Error Codes If the error continues, call HP for technical support to troubleshoot the problem.

Nothing is wrong with the printer as the error is caused by the PC's parallel port. The year and the month that the printhead was manufactured. Recommended action Press ENTER on the printer's front panel to continue. click site When the printer is turned on for the first time, it will automatically perform the priming process.

If using the network card is not possible or acceptable, it is recommended that the parallel port setting in the PC BIOS be set to ECP mode (contact the PC vendor It happens normally in New Printers and only once (it is unlikely to appear again). The printer front panel display will indicate the progress of the firmware upgrade. Recommended action Ensure the operating temperature is between 0 and 55 degrees Centigrade.

CAUTION: When cleaning the Printheads, do not wipe or clean the firing nozzles on the bottom of the Printhead. Type cd HP Designjet System Maintenance, and press Enter again. A status messages consists of a code and an action message (See Figure 1): Ink displays information on the ink cartridges. Try the following (verify that the message returns OK after each step): 1.

Click here for information on contacting HP Customer Care. top Provide feedback Please rate the information on this page to help us improve our content. Click here for information on contacting HP Customer Care. If all six ink cartridges present the same error message, check the following: All ink cartridges installed are not of the wrong type i.e.

Remove the setup printheads and replace them with printing printheads. Turn the printer on. Click here for information on contacting HP Customer Care. XX16 Replace The printer was printing: printhead short Select Yes to replace printheads or No to finish print job without the failed printhead (print quality is affected).

Continue to hold down the DOWN ARROW and the TOP key until the front panel display shows a list of four selections. Click here to find information on how to reseat/add memory . If the problem persists following the upgrade, replace the lens cover: Scroll to the Printer Setup Options icon and press the Enter key. I'm wondering if you have any suggestions, otherwise it's looking more like I'll have to call a service company.

If the correct consumable is inserted, check that the Carriage tube connector is correctly connected to the carriage. top System Error 0B0008 (non-continuable) Explanation Unable to detect the Cooling fan. Click here for information on contacting HP Customer Care.