I am also having the same problem - Anonymous 2 I have a Canon MP830 with an error that says "Paper output slot, the paper is jammed, clear the paper and error 6A00 Pictures helped solved this. thetechtree 15.427 weergaven 6:58 Meer suggesties laden... Even when I wipe up the print cartridge, the next print will mess up the bottom of the print cartridge with ink again.Solved the problem by following trigger1937's outlined steps:1. have a peek at this web-site
The Spring that retracts the wiper blades may have come off and jammed the carriage asm, or the purge gears broke and the purge unit is jammed. Got ink on my fingers but after a restart, the printer now works! - wgu How do you get at the purge unit? Any ideas. my local repair shop told me that it was a fatal error and that it would cost too much to fix.
Some where in the paper path a sensor is activated indicating paper jam so the printer will give off a 6A00 code. Sluiten Meer informatie View this message in English Je gebruikt YouTube in het Nederlands. Here are a couple of things to try.
The advice is priceless, as after a minute or so I was able to push down that white thingy in the sponge thing on the right and the printer came back I had a MP780 that was about 2 years old when it stopped powering on. thanks thanks again… GEORGE says: September 14, 2011 at 12:39 pm bravo my friend it worked Trackbacks/Pingbacks Solution Canon Pixma IP4300 Error 6A00 « Resetter Download Apr 10 FoxTab, Canon Mp600 Error Code 6a00 Ask IT Technicians for Answers ASAP Not a Printers Question?
The MP830 may require repair 5. Canon Pixma Mp500 Error Code 6a00 Jan 27, 2010 speedracer Getting Fingers Dirty Joined: May 27, 2007 Messages: 17 Likes Received: 0 Trophy Points: 22 Received the above code. I like this topic as I am also interested anything related to computer, internet and software. I've tried most of the moves suggested here...cleaning the printhead, depressing the purge sponges etc.
Best Regard petzaryk says: August 19, 2009 at 9:38 pm Thank you very much it worked for me, very thanks. Error Code 6a00 Canon Pixma Ip6600d So the wiper could not seat all of the way. Steve W. it worked - Anonymous After reading several postings.
Good luck. I have jiggled the purge unit (moves, but not much... 1/4 inch or so), and slid the ink-tank housing back and forth. Canon Mp830 Error Code 6a00 Alarm A Pixma MP830 would still be under Canon warranty, get it into a shop and save yourself the hassel. Canon Pixma Mx850 Error Code 6a00 Just want to add that after I turned my printer back on, the printer took several minutes to reposition itself and I could hear something moving every few seconds.
ztarrfect 186.976 weergaven 17:12 TCT - Druckkopf nur mit Wasser reinigen Tutorial - Duur: 5:30. http://completeprogrammer.net/error-code/canon-pixma-830-error-code-6a00.html PK POW PK Poll PK Featured Thread Canon MP830 - 6A00 error code Discussion in 'Canon InkJet Printers' started by speedracer, Jan 27, 2010. If this media is not loaded properly, it will feed into the printer and will not exit. Comment Flag More Print this page Share this page × Moderate Help this question get an answer Is this question mis-categorized or about a different product? Canon Pixma Mp600 Error Code 6a00
Dec 09, 2008 | Canon PIXMA MP830 All-In-One InkJet... Need to install. The print heads do not move to the center when I open the unit as it used to. Source Once again check the status.
It was working fine last week when I bought it in the USA. Canon Mp530 6a00 Probeer het later opnieuw. It worked OK and the next time I got that message.
If you had a paper jam and tried to forcefully pull it out, you could have pulled the internal gears out of alignment. I have rebooted several times. Could the problem be something to do with this?Thanks in advance for any help you can give! Canon Printer Error 6a00 Mp610 I printed another photo and noticed that simultaneous with the odd noise, I could see the photo change path, sliding to the right, as it was passing forward through the rollers.
Hope this help others. finnaly IT WORKS BUT I DON'T Know where I must put this small sponge again at this place !I expect an answer...merci - Anonymous There is a sponge to the right It starts up with an error message "Error. have a peek here Now that the power is off, you can move the printhead asm to the far left and this will give you a little more room to access the purge unit.
I was ready to run out and purchase a new printer, but decided to keep reading through the postings when I found the fix. Any suggestions would be greatly appreciated. Contact a Canon authorized center for that. Any help is greatly appreciated.
Even then it is going to be difficult. Not finding what you are looking for?