Home > Dell Optiplex > Dell Optiplex Error Codes 2 4

Dell Optiplex Error Codes 2 4

Contents

Help Describes the test and any requirements for running the test. If two or more memory modules are installed, remove the modules (see your service manual), then reinstall one module (see your service manual) and restart the computer. You can identify these systems by the fact that there is no Diagnostics LED block on the front of the unit. Close the test screen to return to the Main Menu screen. have a peek at these guys

Plug the computer into a working electrical outlet and press the power button. Ensure that all hard drive and optical drive cables are properly connected to the system board. Dell Diagnostics Main Menu After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want. Plug the computer into a working electrical outlet and press the power button. http://www.dell.com/support/article/us/en/04/SLN284978/en

Dell Optiplex 755 Error Codes 2 And 4

Symptom Tree Lists the most common symptoms encountered and allows you to select a test based on the symptom of the problem you are having. Move the monitor away from external power sources — Fans, fluorescent lights, halogen lamps, and other electrical devices can cause the screen image to appear shaky. Bezig...

If the computer boots, add the cards back one by one until you find the bad one.If the problem persists, the system board may be faulty. NOTE: The procedures in this document were written for the Windows default view, so they may not apply if you set your Dell computer to the Windows Classic view. Test the keyboard — Connect a properly working keyboard to the computer, then try using the keyboard. Dell Optiplex Gx620 Error Codes The diagnostic lights are not lit after the computer successfully boots to the operating system.

The Dell Diagnostics is located on a separate diagnostic utility partition on your hard drive. Dell Optiplex 755 Error Codes 3 And 4 Reseat the 2x2 power connector from the power supply unit. Kies je taal. http://f5k.wikia.com/wiki/Front_Panel_Lights_-_Optiplex_755,_960,_980 If the problem persists, the system board is probably bad.

You can customize the tests you want to run. Dell Optiplex Gx520 Error Codes If identified the memory failed, replace the memory. Dell Diagnostics Main Menu After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want. Reseat any installed graphics cards.

Dell Optiplex 755 Error Codes 3 And 4

At the Dell Diagnostics Main Menu, left-click with the mouse, or press and then , to select the test you want to run (see Dell Diagnostics Main Menu). Uw feedback is verzonden. Dell Optiplex 755 Error Codes 2 And 4 If the operating system is attempting to boot from a device (such as the floppy drive or optical drive), check system setup to ensure the boot sequence is correct for the Dell Optiplex Gx270 Error Codes Reseat the 2x2 power connector from the power supply unit.

Ensure that the memory you are using is supported by your computer. http://completeprogrammer.net/dell-optiplex/dell-optiplex-330-error-codes-3-4.html Note: Please be aware that if your system completes POST without stopping on a particular error code and then gives a black screen, the most likely reason is that you are Possible peripheral card or system board failure has occurred. Back to Top 5. Dell Optiplex Gx280 Error Codes

Steady Amber Power connector not installed properly. Reseat all power and data cables. Diagnostic LEDs for the OptiPlex series (Prior to 2005) This series of systems had a block of A, B, C, D LEDs on the back of the chassis that lit up check my blog Parameters Allows you to customize the test, if applicable, by changing the test settings.

Custom Test Tests a specific device. Dell Optiplex Error Codes 1 3 If the problem persists, the system board / system board component is probably bad. Extended Test Performs a thorough check of devices in the system.

The diagnostic lights are not lit after the computer successfully boots to the operating system.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. If you purchased a sound card, ensure that the speakers are connected to the card. If the problem persists, contact Dell. Dell Optiplex Error Lights 3 4 Laden...

Hardware ALL How-tos Win 10 Win 8 Win 7 Win XP Win Vista Win 95/98 Win NT Win Me Win 2000 Win 2012 Win 2008 Win 2003 Win 3.1 E-Home Office Replace the processor with a known good processor. Replace the battery. news BIOS not execution.

Click the Applications tab. In the Hardware Troubleshooter list, select the option that best describes the problem and click Next to follow the remaining troubleshooting steps. Only part of the display is readable Connect an external monitor — Shut down your computer and connect an external monitor to the computer. For help in resolving this problem, please note this checkpoint and contact Dell Technical Support — The computer failed to complete the boot routine three consecutive times for the same error

The following tabs provide additional information for tests run from the Custom Test or Symptom Tree option: Tab Function Results Displays the results of the test and any error conditions encountered. Note : Please click on the title of the section you want to open below, in order to see the contents. Close the test screen to return to the Main Menu screen. Alert!

For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at www.dell.com/regulatory_compliance. NOTICE – Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at www.dell.com/regulatory_compliance. When the boot device list appears, use the up- or down- arrow keys to highlight CD/DVD/CD-RW Drive then press .

Diagnostic Indicator Table State State Name Power Light: Amber Blinking Amber Blinking Pattern Problem Description Suggested Resolution - - 2, 1 2 blinks followed by a short pause, 1 blink, long Code Cause 1-1-2 Microprocessor register failure 1-1-3 NVRAM read/write failure 1-1-4 ROM BIOS checksum failure 1-2-1 Programmable interval timer failure 1-2-2 DMA initialization failure 1-2-3 DMA page register read/write failure 1-3 Replace the battery only with the same or equivalent type recommended by the manufacturer.